Epson TM-P60 Label Maker User Manual


 
Rev. B Application Development Information 4-7
TM-P60 with Peeler Technical Reference Guide
After an error occurs, more detailed information about the error can be obtained from the
ErrorLevel, ErrorStation, and ErrorString properties.
4.4.2.3 ESC/POS commands
When you use ESC/POS commands to control the printer, you can get the status by using
“status command” including Auto Status Back command (ASB.) Please refer to “ESC/POS
APG.”
4.5 NV memory
This printer has NV memory (Non-volatile). The data of NV memory remains after you turn off
the power. The NV memory is available in two ways.
1. NV Graphics
Please refer “NV Graphics Printing” (page 4-8) for details of the function.
2. User NV memory
There is free area in the NV memory that the user can use. You can use this free area for
notations, to write other character information, or for many other purposes. The data
remains after you turn off the power. Use ESC/POS commands to read and write this data.
The following are examples of purposes.
Date of the printer for maintenance
ID definition for developer or POS system
Note
When you use User NV memory area by using OPOS or APD, you have to use “Direct I/O method”
or “Control A font.” Please contact EPSON or your dealer for details.
Note the following when writing to and erasing NV memory.
The following restrictions apply when performing NV memory operations (including data
writing and erasing).
•The paper FEED button must not be used to feed paper.
The real-time command must not be executed.
The ASB status will not be sent, even when the ASB function is set to enabled.
The printer sometimes enters the Busy state while data is written to NV memory. It is
important not to send data from the host computer while the printer is in the Busy state, as it
will be incapable of processing any received data.
Frequent use of the functions for writing to and erasing data from NV memory can damage
the memory. As a rule in using the various commands, avoid writing to NV memory more
than 10 times per day.