Filter
Top Products
2-3FPC 5000 Front Panel Controller • FPC Installation and Operation
2. Remove the computer and the panel from the shipping carton. Support the
FPC computer as shown in figure 2-1.
Figure 2-1 — A properly supported FPC computer and panel
3. Place the computer and panel on the tabletop with a book or other 1”-high
object under the computer to support it as it nests in the panel.
4. With the tabs up, angle one of the included mounting blocks and insert the
block’s two tabs into the slots on one corner of the FPC computer
(figure 2-2). Slide the mounting block up and then lower the
block so that the tabs in the block engage the sides of the
computer and the block’s side is flush against the computer’s
case.
Figure 2-2 — Computer and panel mounting block installation
Tabs
Mounting
Block