Filter
Top Products
2-5FPC 5000 Front Panel Controller • FPC Installation and Operation
Rack Mounting the FPC Assembly
The appropriate rack mounting hardware is included with the controller. Rack
mount the controller as follows:
1. Insert the controller assembly into the rack, align the holes in the mounting
panel with those of the rack.
2. Secure the controller assembly to the rack using the supplied machine screws.
Rear Panel Connections
All connectors are on the rear of the FPC 5000 (figure 2-5).
EXT. FDD
MOUSEK/B
NET
PRN
AC 100V-230V
INPUT
DIO
COM4
COM3
VGA
COM2
COM1
I
o
1
2 3
Figure 2-5 — FPC 5000 Front Panel Controller rear panel features
1
Net port — Connect one end of a Category (CAT) 5e or higher cable,
terminated with RJ-45 connectors, to the FPC 5000 via this RJ-45 connector.
The FPC 5000 ships with a 10-foot crossover CAT 5e cable.