Extron electronic PVS 200 Switch User Manual


 
PoleVault Systems Installation • Introduction — Inventory Overview
1-10
Introduction Inventory Overview, cont’d
d. Installation tools
To aid the professional installer, this checklist gives the tools recommended to complete the installation.
Tools should include, but are not confined to:
Laser level, or two levels (large for screen installation, small for wall plates and projector mounts)
Tape measure
Stud nder
Drill and drill bit set including a Unibit to cut through metal studs
Extension drill bit (3/4" min., 4 to 8 foot length, to drill through re-breaks)
Socket set
Pipe strap or wrapped pipe wrench
Lineman’s pliers and wire strippers
Standard screwdriver set and Tweeker
Cable cutters (to cut safety wire)
Dry wall saw and hacksaw blade mounted on handle (for cutting ceiling tiles)
Flashlight and safety goggles
Razor knife
2" hole saw
Painter's tape (to mark up walls), pencil, and marker pen
RJ-45 crimpers and RJ-45 connectors
Voltage tester
Fish tape, pull string, and electrical tape (for taping sh tape to pull string)
Zip ties
Vacuum cleaner
Heat gun