Extron electronic PVS 200 Switch User Manual


 
PoleVault Systems Installation • Installation — Stage 5
2-26
Stage Five — Congure the System
Stage 5
Items needed to help complete this stage:
Laptop (or PC) with a network connection
GC 2 conguration program (download from www.extron.com)
MLC 104 IP Plus User’s Manual
Projector manufacturer’s user’s manual
Device driver and/or driver package
(download from www.extron.com)
1. Congure the system
a. Download and install Extron’s Global Congurator
(GC2) conguration program (available at
www.extron.com) on the laptop or PC
b. Ensure the laptop (or PC), and the MLC 104 IP Plus are
connected to the LAN.
N
If this is not possible, connect a 2.5 mm TRS
configuration cable (part # 70-355-01) to the laptop
(or PC) and to the front panel configuration port of
the MLC 104 IP Plus.
c. Launch GC2. Click on Help, then Contents (or press F1).
1a
Load Global Configurator 2 software
Stage Five — Congure the System
1c
Launch the Global Configurator 2
program