Filter
Top Products
USING SETUP MODE
Table 5.4 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Items
Options Description
<PRT-DIR> BI-DIR
Bidirectional printing. The printer prints in
h
re
eit er direction while seeking the next print
di ction for a shorter print time.
UNI-DIR
i
prin
tables even if vertical alignment is not
er
tional printing.
Un directional printing. Unidirectional
ting is used for printing vertical lines in
adjusted. Unidirectional printing is slow
than bidirec
<BUZZER> r status buzzer. Enables or disables the printe
ON Buzzer on (recommended).
ps to indicate paperout or
other conditions.
The printer bee
OFF Buzzer off under any conditions.
<WORD-LG>
To d ired word length, refer
to your computer documentation. Select 8-
etermine the requ
BIT to print bit image graphics.
8 BIT 8-bit word length (used by most computers)
7 BIT 7-bit word length (MSB = 0)
<BUFFER>
Assigns buffer memory to input data and
downloaded font data.
Print buffer Download buffer
NONE 0 byte 128K bytes
256BYTE 256 bytes 127.75K bytes
2KBYTE 2K bytes 126K bytes
8KBYTE 8K bytes 120K bytes
24KBYTE 24K bytes 104K bytes
32KBYTE 32K bytes 96K bytes
96KBYTE 96K bytes 32K bytes
128KBYT 128 0K bytes K bytes
5-28 User's Manual