Filter
Top Products
USING SETUP MODE
Ch k
The V-A
sometim
left to rig
shown b
This example shows how printing looks
wh n vertic
misaligned. Note that the left
If you no
and correct the vertical print alignment.
Proce
Make su
possible mm (14 inches) wide to avoid printing on
the e you set
the WIDTH opt
MENU1
follows rtical print alignment:
1.
k that the following <<FUNCTION>>
<< FUNCTION >>
SAVE&END MENU1 MENU2 HARDWRE ADJUST CONFIG GAP-ADJ DEFAULT LIST SELF-TST
HEX-DUMP V-ALMNT INITIAL
ec ing Vertical Print Alignment (V-ALMNT)
LMNT function corrects the vertical character displacement that
es occurs with bidirectional printing. Characters printed from
ht are not aligned with characters printed from right to left as
elow:
e characters are ally
margin is not straight.
tice misaligned printing, use the following procedure to check
dure
re that continuous forms paper is loaded in the printer. If
, use forms at least 356
plat n. However, you can also use letter or A4 size forms if
ion in MENU1 to 8 inches. See the section Changing
and MENU2 Items and Options for details. Then proceed as
to check and correct ve
Enter setup mode.
Press the AUTO GAP button and the HI IMPACT button
simultaneously until the printer beeps. Wait for the printer to
stop printing and chec
menu is printed:
2. function.
F” or “LOAD” button to
rinting rows of parallel bars
ter quality speed.
Select the V-ALMNT
Repeatedly press the “TEAR OF
position the cursor at V-ALMNT, then press the “S” button or
the “T” button to select the V-ALMNT function. The printer
prints the help menu then starts p
using let
5-56 User's Manual