Filter
Top Products
SETTING UP
9 If you are using more than one software package, determine
which emulation is supported by the software you use most
frequently.
Select that emulation.
9 If your software supports more than one emulation, select the
DPL24C PLUS emulation if possible. This emulation has the
greatest capabilities.
9 If you want to use an emulation that is not supported by your
software, contact your software manufacturer or printer dealer
and ask whether support is available. You may be able to obtain
a printer driver that is not shipped with the original software
package.
To select an emulation, proceed as follows:
1. Turn the printer on and load a sheet of paper.
To change a single printer setting, such as the emulation, you
can use a single sheet paper. To change several printer settings
as described in Chapter 5, you must load continuous forms
paper. See Chapter 3 for paper loading instructions.
2. Enter setup mode.
Press the ONLINE button to place the printer offline. Then,
press the AUTO GAP button and the HI IMPACT button.
As the printer enters offline setup mode, it prints the following
information:
2-24 User's Manual