Filter
Top Products
Initial Configuration
18 EN/LZT 108 6377 R4 - September 2003
The HN294 still offers the possibility for advanced users to set up special
network scenarios themselves or to modify the existing ones. Refer to the
“Advanced Configuration” chapter for further information.
TIP: For advanced network scenarios, select the ADSL-mode that is closest
to your requirements and then modify it to meet your needs. This is easier
than creating a complete new profile.
3.2 Access the Configuration Wizard
Follow the steps below to access the built-in Configuration tool and start the
Configuration Wizard.
NOTE! Before performing the following steps make sure that all the
steps in chapter “Hardware Description and Installation” have been
performed.
1. Start your web browser and type 192.168.0.1 (the private IP
address for the HN294d) in the URL field and press Enter.
2. To access the Configuration tool you have to login and the following
window is displayed:
3. Type admin in both the “User name” and “Password” fields that are
the default settings for the HN294d, and click OK.