Filter
Top Products
Advanced Configuration
EN/LZT 108 6377 R4 - September 2003
55
00:90:96:1A:2B:3C and only number 0 through 9 and letters a
through f are allowed.
2. Click the Apply button and the following page appears:
3. Verify that the correct MAC address is shown in the list of
authorized clients.
4. Select System > Save Configuration and click the Save button to
save your new settings.
Add / Remove client
If Association Control is enabled and you want to add a new wireless client
(MAC address) to the list of approved clients, proceed as follows:
1. Click the Add a new client button. The following page appears:
2. Enter the MAC address of the wireless client and click the Apply
button.