Filter
Top Products
Advanced Configuration
EN/LZT 108 6377 R4 - September 2003
39
The HN294d supports firmware upgrades via HTTP.
To transfer a new firmware file and upgrade the HN294d, follow the steps
below:
1. Download and unzip the new firmware file to your local PC.
2. In the File Name of Firmware field, click the Browse button to
locate the upgrade file.
3. Click the Upgrade button.
DO NOT turn off the HN294 during the firmware upgrade. The
upgrade process may take a while due to extensive testing of the
software. After upgrading, the original configuration settings will
remain.
4. The status of the firmware upgrade will be displayed after the
firmware upload is completed.
NOTE! In case that an upgrade fails, all LEDs will lit and the Web
Manager will not be accessible. Please refer to the
“Troubleshooting” chapter (section Safety Mode) for information
about how to access the router and make a new upgrade.
9.4.6 Reset Router
The System > Reset Router page allows you to reset your HN294.