Garmin HN294DP/DI Network Router User Manual


 
Advanced Configuration
EN/LZT 108 6377 R4 - September 2003
57
selected:
4. Fill in the parameters according to information from your ISP/service
provider and click the Apply button.
5. Select System > Save Configuration and click the Save button to
save your new settings.
The parameters for creating a new ATM PVC Interface are described
below. Note that not all parameters are shown for all Data Modes.
Parameter Description
ATM Properties
VPI Identifies the VPI (Virtual Path Identifier). The valid
range is from 0 to 255.