Filter
Top Products
100 Maintaining and Troubleshooting the Gateway ALR 7300 Server
Keyboard not detected. See “The keyboard doesn’t work.” on
page 94.
Turn off the system and check the keyboard
cable.
Keyboard stuck key failure. Remove any objects that may be resting on
the keyboard, and then restart the system.
Check for sticky keys. Clean the keyboard if
necessary.
Memory errors were
detected while the system
powered up.
See “Memory errors were detected during
system start up.” on page 89.
Memory size error. Enter BIOS Setup and save the memory
configuration.
Non-system disk or disk
error.
Eject the diskette and press Enter.
If the diskette is bootable, check it for errors.
Not enough memory. Close all programs that are not currently in
use.
Print queue is full. Wait until the current print job has completed
before sending another print job.
If you receive this error often, you need to add
memory to the printer.
Printer is out of paper. Add paper to the printer.
Make certain the printer is online.
Required parameter
missing.
Make certain you entered the right command.
If you are trying to exit MS-DOS to return to
Windows, type exit and press Enter.
Syntax error. Make certain you entered the right command.
If you are trying to exit MS-DOS to return to
Windows, type exit and press Enter.
Time and date not set. Enter BIOS Setup to set the system date and
time.
Write protect error. Move the write-protection tab over the hole on
the back of the diskette.
Error Message Solutions
4075.book Page 100 Friday, April 2, 1999 9:26 AM