Filter
Top Products
BIOS Setup 73
• Interrupt: displays the current interrupt for integrated Serial
Port B. Using the + or - key displays the optional interrupts
available.
•
Parallel Port: allows you to set the characteristics of the integrated
parallel port. Options include
Enabled, Disabled, Auto, and OS
Controlled
.
• Mode: displays the current parallel port mode. Options
include
ECP
(Extended Capabilities Port),
Bi-directional
and
Output Only
.
• Base I/O Address: displays the base I/O address for the
integrated Parallel Port. Using the + or - key displays the
optional addresses available.
• Interrupt: displays the current interrupt for the integrated
Parallel Port. Using the + or - key displays the optional
interrupts available.
• DMA Channel: displays the current DMA channel used by
the Parallel Port. Using the + or - key displays the optional
channels available.
•
Floppy Disk Controller: controls the integrated diskette drive
controller. Options include
Enable and Disable.
• Base I/O Address: displays the base I/O address for the
integrated diskette controller. Options include
Primary
and
Secondary
.
4075.book Page 73 Friday, April 2, 1999 9:26 AM