Filter
Top Products
8 Maintaining and Troubleshooting the Gateway ALR 7300 Server
Closing the system
Before closing the system, verify that all connectors and boards are
properly installed and firmly seated.
Replacing the top cover
If you have removed the top cover to access components at the top of the
system, replace the top cover before replacing other covering pieces.
1.
Align the top cover with the ledges on the chassis. See Figure 4.
Figure 4: Replacing the Top Cover
2.
Place the cover straight down on the top of the chassis.
3.
Secure the cover with the four screws you removed earlier.
To Replace the Top Cover
4075.book Page 8 Friday, April 2, 1999 9:26 AM