Filter
Top Products
Components 17
Front panel connector
The front panel connector provides the signals for the front cover indicator
LEDs and the front cover buttons. This connector is not used in the ALR
7300 server.
Reset connector
The reset connector provides the connection of the reset button from the
front cover. This connector is not used in the ALR 7300 server.
External hard drive LED connector
The external hard drive LED connector allows you to connect a cable from
an external hard drive to the system board to allow hard drive activity and
system monitoring to recognize the external drive.
Hard drive LED connector
This connector allows you to connect all of the hard drives to the hard drive
activity LED on the front cover. This connector is not used in the ALR 7300
server.
User NMI connector
This connector allows you to connect a signal cable which carries an
user-induced NMI signal to the system board.
EDC reset connector
The EDC reset connector provides the connection for the keyboard lock
button/ECC reset button from the front cover. This connector is not used in
the ALR 7300 server.
Speaker connector
Connects the internal speaker to the system board.
4075.book Page 17 Friday, April 2, 1999 9:26 AM