Filter
Top Products
44 Maintaining and Troubleshooting the Gateway ALR 7300 Server
Replacing the RAID cage in the 5.25-inch drive bay
The Quick Hot-Swap Drive Cage consists of a drive cage, a locking door,
and all the necessary hardware to install it in the system. Each cage
supports three drives. Begin cage installation from the bottom drive bay.
Figure 26: Hot-Swap Drive Cage
1. Remove the side panel as described in “Removing the side panel” on
page 3.
2. Disconnect all cables connecting the RAID Cage to other system
components.
3. Remove the drives:
A. Pull the latching clips outward to release the drive from the RAID
Cage (see Figure 27).
To Replace the RAID Cage
4075.book Page 44 Friday, April 2, 1999 9:26 AM