Filter
Top Products
80 Maintaining and Troubleshooting the Gateway ALR 7300 Server
Exit menu screen
This screen allows you to exit the Setup program or to save any changes you
have made to the BIOS settings.
Figure 50: Exit Menu Screen
•
Exit Saving Changes: exits BIOS Setup and saves the changes
you have entered in the CMOS. The next time you boot the system,
the BIOS configures your system using the new settings.
•
Exit Discarding Changes: exits BIOS Setup and discards the
settings you have entered. The next time you boot the system, the
BIOS configures your system using the old settings.
•
Load Setup Defaults: displays the setup defaults in cases where
the settings have been corrupted or incorrectly modified. Press
F
1
to resume the boot, or
F
2
to run BIOS Setup with the ROM default
values already loaded into the menus.
•
Discard Changes: restores the CMOS settings previously entered
(not the default values) and discards the changes entered in the
current session, without exiting the BIOS Setup.
•
Save Changes: saves the changes you have made during the
current session, without exiting Setup.
4075.book Page 80 Friday, April 2, 1999 9:26 AM