Filter
Top Products
Installing Components 59
NetWare 4.11 drivers and Seagate Backup
Exec issues
NetWare 4.11 driver issues:
When installing the second instance driver for the second SCSI controller,
the server will generate interrupts which hang the server. To resolve this
issue, replace the MPS14.PSM file that is installed during the NetWare 4.11
installation with an updated version of the file. The updated file can be
obtained from the Netware Service Pack 5 utility patch provided by Novell.
The following are two methods that can be used to updated the
MPS14.PSM file:
1. After NetWare is installed and before loading the second on-board
SCSI driver, the updated MPS14.PSM file can be copied to the
C:\NWSERVER subdirectory to overwrite the older version placed
during installation. Restart the server and the second on-board SCSI
driver will load successfully.
2. During the NetWare installation, select SMP support, a message to
install an unlisted PSM file will display. Path to the location of the
updated PSM file and load it. Once loaded, the updated PSM file will
automatically be copied to the NetWare installation directory. Once
the file has been copied you can successfully load the second on-board
SCSI driver.
Seagate Backup Exec issues:
Once Seagate Backup Exec has been installed and the program started, the
CLIB and DSAPI modules report errors while loading. Backup Exec will
continue to run after the errors appear. Backup Exec recommends that these
files be updated to a later version. The updated files can be obtained from
Novell’s website at the following location:
http://support.novell.com/cgi-bin/search/download?/pug/updates/nw/i
nw411/libuph.exe&sr
The update files are CLIB.NLM and DSAPI.NLM.
4075.book Page 59 Friday, April 2, 1999 9:26 AM