Filter
Top Products
258
Chapter 17: Troubleshooting
www.gateway.com
The display goes black while the tablet is still turned on
■ Tablet has gone into Standby after sitting idle (power status indicator is
blinking green). Slide and hold the Power switch for about a second to
resume operations.
■ Tablet has gone into low-battery Hibernate (power status indicator is
blinking green). Slide and hold the Power switch for about a second to
resume operations, and charge the battery.
Printer
The printer will not turn on
■ Make sure that the printer is online. Many printers have an online/offline
button that you may need to press.
■ Make sure that the power cable is plugged into an AC power source.
The printer is on but will not print
■ Check the cable between the printer and your tablet PC. Make sure that
it is connected to the correct port.
■ Make sure that the printer is online. Many printers have an online/offline
button that you may need to press so the printer can start printing. Press
the button to put the printer online.
■ Check the port and cable for bent or broken pins.
■ If the printer you want to print to is not the default printer, make sure
that you have selected it in the printer setup.
To set a default printer:
1 Tap Start, then tap Control Panel. The Control Panel window opens.
If your Control Panel is in Category View, tap
Printers and Other
Hardware
.
2 Tap/Double-tap the Printers and Faxes icon. The Printers and Faxes
window opens.
3 Button-tap the name of the printer you want to be the default
printer, then tap
Set as Default Printer.