Filter
Top Products
3 - 32
Stacked Symbologies
EAN•UCC Composite Codes
Linear codes are combined with a unique 2D composite component to form a
new class called EAN•UCC Composite symbology. EAN•UCC Composite
symbologies allow for the co-existence of symbologies already in use.
Message Length
The message length selection is used to set the valid reading length of the bar
code. If the data length of the scanned bar code doesn’t match the valid reading
length, the scanner will not read the symbol. You may wish to set the same value
for minimum and maximum length to force the scanner to read fixed length bar
code data. This helps reduce the chances of a misread.
EXAMPLE:Decode only those bar codes with a count of 9-20 characters.
Min. length = 09 Max. length = 20
EXAMPLE:Decode only those bar codes with a count of 15 characters.
Min. length = 15 Max. length = 15
The desired message length and
Save
must be input after reading this
programming symbol. Refer to the Programming Chart (inside back cover).
On * Off
Maximum
Message Length
Minimum
Message Length