Filter
Top Products
2 - 32
Adding a Prefix or Suffix
1. Scan the
Add Prefix
(page 2-34) or
Add Suffix
symbol (page 2-34).
2. Determine the 2 digit Hex value from the "Symbology Chart" on page 2-35
for the symbology to which you want to apply the prefix or suffix.
3. Scan the 2 hex digits from the Programming Chart inside the back cover or
scan
9
,
9
for all symbologies.
4. Determine the hex value from the "Decimal to Hex to ASCII Conversion
Chart" on page 2-36 for the prefix or suffix you wish to enter.
5. Scan the 2 digit hex value from the Programming Chart inside the back
cover.
Note:
Repeat Steps 4 and 5 for every prefix or suffix character.
Note:
To add the Code I.D., scan
5, C, 8, 0
.
To add AIM I.D., scan
5, C, 8, 1
.
To add a backslash (\), scan
5, C, 5, C.
6. Scan Save to exit and save, or scan Discard to exit without saving.
Repeat Steps 1-6 to add a prefix or suffix for another symbology.
Example: Add a Suffix to a specific symbology
To send a CR (carriage return)Suffix for UPC only:
1. Scan
Add Suffix
.
2. Determine the 2 digit hex value from the "Symbology Chart" on page 2-35 for
UPC.
3. Scan
6, 3
from the Programming Chart (inside back cover).
4. Determine the hex value from the "Decimal to Hex to ASCII Conversion
Chart" on page 2-36 for the CR (carriage return).
5. Scan
0, D
from the Programming Chart (inside back cover).
6. Scan
Save
, or scan
Discard
to exit without saving.
Clearing One or All Prefixes or Suffixes
You can clear a single prefix or suffix, or clear all prefixes/suffixes for a
symbology. When you Clear One Prefix (Suffix), the specific character you
select is deleted from the symbology you want. When you Clear All Prefixes
(Suffixes), all the prefixes or suffixes for a symbology are deleted.
1. Scan the
Clear One Prefix
symbol.
2. Determine the 2 digit Hex value from the "Symbology Chart" on page 2-35
for the symbology from which you want to clear the prefix or suffix.
3. Scan the 2 digit hex value from the Programming Chart inside the back cover
or scan
9, 9
for all symbologies.
Your change is automatically saved.