Filter
Top Products
2 - 18
LED Flashing
When LED Flashing is
On
, the LEDs and aiming light alternately flash until a
symbol is decoded or the trigger is released.
If LED Flashing is turned
Off
, the average current draw is increased and the
aiming light won’t illuminate while the scanner reads a bar code. The LEDs
remain on while the scanner is reading.
Aimer Delay
The aimer delay allows a delay time for the operator to aim the scanner before
the picture is taken. Use these codes to set the time between when the trigger
is pulled and when the picture is taken. During the delay time, the aiming light
will appear, but the LEDs won’t turn on until the delay time is over.
Off * On
400 milliseconds
* Off
(no delay)
200 milliseconds