Filter
Top Products
2 - 30
This is a delay of up to 495 milliseconds (in multiples of 5) placed between each
scan transmission. You can program up to 99 steps (of 5 ms each). Scan the
Intermessage Delay
bar code below, then scan the number of steps, and the
Save
bar code from the inside back cover.
Note:
If you make an error while scanning the digits (before scanning Save),
scan
Discard
on the back cover and scan the correct digits and
Save
again.
To remove this delay, scan the
Intermessage Delay
bar code, then set the
number of steps to 00. Scan the
Save
bar code from the inside back cover.
2nd Scan Transmission1st Scan Transmission
Intermessage Delay
Intermessage Delay