Filter
Top Products
2 - 26
Fast Omni Mode
Normally, the imager searches throughout its whole field of view to determine if
a bar code is present. Fast omni-directional mode provides a reduced search
pattern that increases the scan rate of the imager. When fast omni mode is
enabled, the imager only tries to locate bar codes in the center area of the image.
Consequently, the user is required to center the aiming line over the bar code he
wants to read. When a portion of the bar code is in the center area of the image,
the imager locates and decodes the bar code. The entire bar code does not need
to be in the center area, only a portion of it. Bar codes that are not in the center
area of the image will not be found.
Note: Fast Omni Mode is not recommended when scanning Data Matrix codes.
Beeper Volume
* Normal, Full
Search Mode
Reduced Omni-
directional Mode
Off
* High
Medium
Low