Hand Held Products 4410 Scanner User Manual


 
3 - 23
Linear Symbologies
UPC E0
< Default All UPC E0 Settings >
UPC E0
Most UPC bar codes lead with the 0 number system. For these codes, use the
UPC E0 selection. If you need to read codes that lead with the 1 number system,
use the UPC E1 selection (see "UPC E1" on page 3-24).
Check Digit
This selection allows you to specify whether the check digit should be
transmitted at the end of the scanned data.
Number System
The numeric system digit of a UPC symbol is normally transmitted, but the unit
can be programmed so it will not transmit it.
UPC E0
On
* UPC E0
Off
Transmit
Check Digit
* Don’t Transmit
Check Digit
* Don’t Transmit
Number System
Transmit
Number System