Filter
Top Products
2 - 25
scanning is required. Entries are in milliseconds, from 1 to 10,000. Scan the
Presentation Re-trigger Delay bar code below, then scan the number of
milliseconds and the Save bar code from the inside back cover.
Default = 200.
Presentation Lights
When using the scanner in presentation mode, the illuminating LEDs can be
programmed on or off. If there is sufficient ambient light, the LEDs can be turned
off by scanning the Lights Off bar code below. When a bar code is presented to
the scanner, the illuminating LEDs turn on to scan the bar code and then turn off
when the bar code has been read.
Default = Presentation Mode Lights On
.
Presentation Default
Defaults all presentation mode settings.
Defaults
=
Presentation Mode Off,
Presentation Reread Delay 200 ms.
Presentation Re-trigger Delay
* On
Off
Presentation Default