Filter
Top Products
Installation Checklist 1-5
Installation Checklist
Use the following checklist to install the printer. Detailed
instructions appear on the following pages in this manual and
the documentation that accompanies the server.
1
Refer to the Quick Start Guide that accompanies your
ColorSpan Server for instructions.
Step See Page in
this Manual
!
1. Select a location for the printer that meets its operating
requirements.
1-2
!
2. Move the printer shipping carton to the operating location. (If
necessary, you may assemble the printer in a remote location,
then move it to its operating location.)
--
!
3. If you will be installing a ColorSpan Print Server (ColorMark Pro
or RIPStation), set it up now and power it on. This will allow the
server to perform its automatic one-time system setup while you
unpack and assemble the printer.
(1)
!
4. Inspect the external packaging for shipping damage, remove
packing material, account for parts.
1-6
!
5. Assemble the stand using the screws and screwdriver provided in
the accessory box.
1-8
!
6. Attach the stand to the printer. 1-9
!
7. Lock down the casters and tilt the assembled printer upright. 1-9
!
8. Attach the ink tray to the printer module, remove the internal
shipping foam and bands.
1-10
!
9. Connect power to the printer. 1-11
!
10. Power up the printer and observe the power-up sequence to con-
firm normal operation.
1-13
!
11. Adjust the print head carriage height. 3-16
!
12. Install inks. 3-6
!
13. Install media. 3-20
!
14. Perform an AutoSet calibration. 4-2
!
15. Connect the printer server to the printer. (1)
!
16. Send a DiskDirect file to the printer (if using a ColorSpan print
server), then send an application file from a Macintosh or PC
workstation, to confirm a working network connection.
(1)