Filter
Top Products
1-6 Unpacking and Assembly
Unpacking and
Assembly
This procedure assumes that the printer is in its final location.
See the Site Preparation Guide for moving and unpacking hints.
WARNING
The printer is too heavy to be lifted safely by one
person. At least two persons are required to lift the
printer.
WARNUNG
Der Drucker ist zu schwer für eine Person. Mindes-
tens 2 Personen sind erforderlich um den Drucker
anzuheben.
Note
If you will be installing a ColorSpan Print Server
(ColorMark Pro or RIPStation), set it up now and
power it on. This will allow the server to perform its
automatic one-time new system check while you
unpack and assemble the printer.
Unpacking
1. Examine the shipping packaging for shipping damage.
Report any damage or apparent rough handling immediately
to the shipper.
2. Remove the bands that secure the box to the pallet and open
the top flaps of the box.
3. Remove the stand crossbar, which is packed on top of the
printer.
4. Remove the stand legs and accessory boxes, which are
packed together in the center of the pallet.
5. Remove the media spools, which are packed together under
the printer module.
6. Remove the corrugated support packaging (end pieces, cen-
ter tower).
7. Remove the outer box from the pallet.
Do not remove the printer module from the pallet at this
time. The printer, resting on its back on the pallet, is at the
correct height and position for assembly to the stand.