Filter
Top Products
Jet Status Lines 4-7
Jet Status Lines
Jet Status Lines provides a quick assessment of which jets are not
firing properly. This test prints a pattern of lines, each segment
of which corresponds a single jet. If there are any missing seg-
ments in the lines, then a cleaning is recommended. If, however,
the lines appear solid and consistent, then cleaning is most
likely not required at this time.
1. Press
a
(Options) on the control panel to display the menus.
2. Press the
c
key to highlight the
Calibrate Printer
option.
3. Press
f
(Proceed) to display the Calibrate Printer menu.
4. Press the
c
key repeatedly to highlight the
Jet Status Lines
option.
5. Press
f
(Proceed).
The printer prints the Jet Status Lines pattern and a legend
for the possible status codes:
R - Not replaced
E - Electrical jet-out
D - Disqualified by camera
Y - Y error
X - X error
If a line appears with no code, the jet is working properly. If
a line appears with a code other than R, it has been identi-
fied and replaced by (reassigned to) other jets. If a line is
missing and appears with or without an R, it has not been
replaced.
After printing is complete, the Calibrate Printer menu reap-
pears.