Filter
Top Products
3-10 Removing and Storing a Big Ink Pack
Removing and Storing
a Big Ink Pack
You can store partially-used Big Ink packs. This enables you to
switch between different types of ColorMark Big Ink as needed.
1. Close the valve on the ink tube.
Caution
Failure to close the valve completely will result in
leaking ink and possible loss of vacuum in the ink
tube.
2. Remove the profiler from the docking station.
3. Remove the ink pack, the tube, and the cartridge as a unit
from the printer.
Release the ink tube from its clips, starting at the Big Ink
pack and work your way toward the cartridge.
4. Keep the profiler with its Big Ink pack. The profilers are not
interchangeable, even between Big Ink packs of the same
color.
Tape the profiler to the partially-used Big Ink pack, and store
them together in a Big Ink shipping carton if possible.
5. Retape the original sealing tape over the heads on each car-
tridge, and store the cartridges upright.
This prevents air from entering the tubes and minimizes
subsequent priming of the jets when placed back into
service.