Filter
Top Products
1-16 Parts Overview
Number Description
1 End cap (two places)
2Stand
- supports the printer.
3 Casters (four places) -
enables easy movement of
printer, can be locked in place.
4Encoder strip
- allows precise positioning of the print
head carriage across the length of the platen.
5 Main carriage drive belt
- moves the carriage across
the length of the platen.
Transport chain
(not shown) - supports the ink supply
tubes.
6Top cover
- protects the user from the rapid motion of
the print head during printing. A safety interlock switch
stops printing and cancels the print if the cover is
raised.
7Platen
- supports the media under the print heads
during printing.
8 Carriage
- carries the ink jet cartridges (print heads)
across the length of the platen.
9 Head Height Adjustment Screw (two places) -
raises
or lowers the carriage to accommodate thick and thin
media.
10 Profiler docking station
- holds the ink profilers, which
communicate characteristics about the ink to the print
server and color management system software.
11 Paper out switch -
detects when the printer is out of
media, which generates a control panel message to the
user.
12 Service station
- catches excess ink from the ink jet car-
tridges, wipes and caps the cartridges to prevent dry-
ing and clogging while not in use.
13 Control panel -
displays messages and allows control
of certain printer operations. Includes a contrast adjust-
ment lever and audio feedback.
14 Electronics module -
contains the printer’s power sup-
ply and control electronics. Includes a humidity sensor
to enable the printer to compensate for high-humidity
conditions by slowing the speed of printing.