Filter
Top Products
user guide
technical information
109
technical information
regulatory notices
The HP Officejet meets product requirements from regulatory agencies in your country/
region.
This section contains the following topics:
• regulatory model identification number on page 109
• notice to users of the U.S. telephone network: FCC requirements on page 109
• FCC statement on page 110
• note à l’attention des utilisateurs du réseau téléphonique Canadien/notice to users
of the Canadian telephone network on page 110
• note à l’attention des utilisateurs Canadien/notice to users in Canada on page 111
• notice to users in the European Economic Area on page 112
• notice to users of the German telephone network on page 112
• declaration of conformity (European Union) on page 112
•geräuschemission on page 112
• notice to users in Korea (Officejet 4255 only) on page 113
regulatory model identification number
For regulatory identification purposes, your product is assigned a Regulatory Model
Number. The Regulatory Model Number for your product is either SDG0B-0306-01 or
SDG0B-0306-02. This regulatory number should not be confused with the marketing name
(HP Officejet 4200 Series) or product number (Q5600A, Q5610A).
notice to users of the U.S. telephone network: FCC requirements
This equipment complies with FCC rules, Part 68. On this equipment is a label that
contains, among other information, the FCC Registration Number and Ringer Equivalent
Number (REN) for this equipment. If requested, provide this information to your telephone
company.
An FCC compliant telephone cord and modular plug is provided with this equipment. This
equipment is designed to be connected to the telephone network or premises wiring using
a compatible modular jack which is Part 68 compliant. This equipment connects to the
telephone network through the following standard network interface jack: USOC RJ-11C.
The REN is useful to determine the quantity of devices you may connect to your telephone
line and still have all of those devices ring when your number is called. Too many devices
on one line may result in failure to ring in response to an incoming call. In most, but not
all, areas the sum of the RENs of all devices should not exceed five (5). To be certain of
the number of devices you may connect to your line, as determined by the REN, you should
call your local telephone company to determine the maximum REN for your calling area.
If this equipment causes harm to the telephone network, your telephone company may
discontinue your service temporarily. If possible, they will notify you in advance. If advance
notice is not practical, you will be notified as soon as possible. You will also be advised of
your right to file a complaint with the FCC. Your telephone company may make changes
in its facilities, equipment, operations, or procedures that could affect the proper operation
of your equipment. If they do, you will be given advance notice so you will have the
opportunity to maintain uninterrupted service.
If you experience trouble with this equipment, please contact the manufacturer, or look
elsewhere in this manual, for warranty or repair information. Your telephone company may
ask you to disconnect this equipment from the network until the problem has been corrected
or until you are sure that the equipment is not malfunctioning.
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subject to state tariffs. Contact your state’s public utility
commission, public service commission, or corporation commission for more information.