Filter
Top Products
90
Enhancements
Release K.13.04 Enhancements
For example, if the host “Labswitch” is in the domain abc.com, you can enter the following command
and the destination is resolved to “Labswitch.abc.com”.
ProCurve(config)# telnet Labswitch
You can also enter the full domain name in the command:
ProCurve(config)# telnet Labswitch.abc.com
You can use the show telnet command to display the resolved IP address.
Figure 16. Example of show telnet Command Displaying Resolved IP Addresses
■ Enhancement (PR_ 0000000089) — The CLI show modules command displays additional
component information for system support modules and mini-GBICS.
Show Module Enhancement
Overview
With this enhancement, the CLI show modules command will display additional component informa-
tion for the following:
• System Support Modules (SSM) — identification, including serial number
• Mini-GBICS — a list of installed mini-GBICs displaying the type, “J” number, and serial
number (when available)
ProCurve(config)# show telnet
Telnet Activity
--------------------------------------------------------
Session : ** 1
Privilege: Manager
From : Console
To :
-------------------------------------------------------
Session : ** 2
Privilege: Manager
From : 12.13.14.10
To : 15.33.66.20
-------------------------------------------------------
Session : ** 3
Privilege: Operator
From : 2001:db7:5:0:203:4ff:fe0a:251
To : 2001:db7:5:0:203:4ff1:fddd:12