Filter
Top Products
101
Enhancements
Release K.13.16 Enhancements
Note on Using Pattern Matching with the “Show Interfaces Custom” Command
If you have included a pattern matching command to search for a field in the output of the show int
custom command and the show int custom command produces an error, the error message may not
be visible and the output is empty. For example, if you enter a command that produces an error (vlan
is misspelled) with the pattern matching include option:
ProCurve(config)# show int custom 1-3 name vlun | include vlan1
the output may be empty. It is advisable to try the show int custom command first to ensure there is
output, and then enter the command again with the pattern matching option.
■ Enhancement (PR_0000000857) — This enhancement reduces the PIM delay time,
thereby reducing the amount of time it takes for a packet to arrive at its destination when
an IGMP Join is issued. A delay occurs in PIM when processing IGMP Join messages. This
enhancement reduces the delay, thereby reducing the amount of time it takes for a packet
to arrive at its destination when an IGMP Join is issued. There are no CLI changes with this
enhancement.
■ Enhancement (PR_0000001790) — This enhancement provides the no-tag-added
parameter that gives the user the option of not tagging a mirrored copy of an outbound
packet.
Mirror Port VLAN Tagging
ProCurve switches can mirror inbound and outbound traffic to local ports on the switch, or to ports
on remote switches. Currently, a VLAN tag is added to the mirrored copy of untagged outbound
packets to indicate the source VLAN of the packet. However, it is desirable in some situations to have
mirrored packets look exactly like the original packet.
This enhancement provides the no-tag-added parameter that gives you the option of not tagging a
mirrored copy of an outbound packet.
Note
A mirror destination for the session must be assigned before a port monitoring source is assigned.