Filter
Top Products
78
Enhancements
Release K.13.04 Enhancements
Note
A Backup VR switches to priority zero instead of its configured value when all its tracked entities go
down. An Owner VR always uses priority 255 and never relinquishes control voluntarily.
CLI Commands
The following commands are used for this enhancement.
Note
You can only configure tracked interfaces or VLANs on the Backup router.
Configuring Track Interface
The track interface command allows you to configure tracking for a port or list of ports, or a trunk or
list of trunks.
Note
VR operation must be down before executing this command. Use the no enable command to disable
VR operation.
For example:
ProCurve(config)# vlan 25
ProCurve(vlan-25)# vrid 1
ProCurve(vlan-25-vrid-1)# track interface 10-12, Trk1
Syntax: [no] track interface <port-list/trunk-list>
Allows you to specify a port or port list, or trunk or trunk list, that will be tracked
by this virtual router. If the port or trunk is down, the virtual router switches to
the router specified by the priority value. The command is executed in VRID
instance context.