Filter
Top Products
103
Enhancements
Release K.13.16 Enhancements
Figure 23. Example of Session Output Showing no-tag-added Option
Note
For more information about traffic mirroring, see “Monitoring and Analyzing Switch Operation” in
the Management and Configuration Guide for your switch. For more information about ACL
filtering, see “Access Control Lists (ACLs)” in the Access Security Guide for your switch.
Using SNMP to Configure No-Tag-Added
The MIB object hpicfBridgeDontTagWithVlan is used to implement the no-tag-added option, as shown
below:
hpicfBridgeDontTagWithVlan OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
“This oid mentions whether VLAN tag is part of the
mirror’ed copy of the packet. The value ‘enabled’
denotes that the VLAN tag shouldn’t be part of the
mirror’ed copy; ‘disabled’ does put the VLAN tag in the
mirror’ed copy. Only one logical port is allowed.
This object is persistent and when written the entity
ProCurve# show monitor 1
Network Monitoring
Session: 1 Session Name:
ACL: no ACL relationship exists
Mirror Destination: 48
Untagged traffic : untagged
Monitoring Sources Direction
------------------ ---------
Port: 3 Both
Indicates the no-tag-added option is configured.