Filter
Top Products
47
Enhancements
Release K.12.06 Enhancements
<auth-pass> is the hashed authentication password used with the configured authentication method.
priv “<priv-pass>” is the (optional) hashed privacy password used by a privacy protocol to encrypt
SNMPv3 messages between the switch and the station.
The following example shows the additional security credentials for SNMPv3 users that can be saved
in a running-config file:
Figure 5. Security Credentials for SNMPv3
Although you can enter an SNMPv3 authentication or privacy password in either clear ASCII text or
the SHA-1 hash of the password, the password is displayed and saved in a configuration file only in
hashed format, as shown in the preceding example.
For more information about the configuration of SNMP security parameters, refer to the “Configuring
for Network Management Applications” chapter in the Management and Configuration Guide.
802.1X Port-Access Credentials
In software release K.12.06 and greater, 802.1X authenticator (port-access) credentials can be stored
in a configuration file.
802.1X authenticator credentials are used by a port to authenticate supplicants requesting a
point-to-point connection to the switch. 802.1X supplicant credentials are used by the switch to
establish a point-to-point connection to a port on another 802.1X-aware switch. Only 802.1X authen-
ticator credentials are stored in a configuration file. For information about how to use 802.1X on the
switch both as an authenticator and a supplicant, refer to the “Configuring Port-Based and
Client-Based Access Control (802.1X)” chapter in the Access Security Guide.
In software release K.12.06 and greater, the local password configured with the password command
is no longer accepted as an 802.1X authenticator credential. A new configuration command (password
port-access) is introduced to configure the local operator username and password used as 802.1X
authentication credentials for access to the switch.
The password port-access values are now configured separately from the manager and operator
passwords configured with the password manager and password operator commands and used for
management access to the switch. For information on the new password command syntax, see
“Password Command” on page 45.
auth md5 “9e4cfef901f21cf9d21079debeca453” \
priv “82ca4dc99e782db1a1e914f5d8f16824”
snmpv3 user boris \
priv “5bc4313e9fd7c2953aaea9406764fe8bb629a538”
auth sha “8db06202b8f293e9bc0c00ac98cf91099708ecdf” \
snmpv3 user alan \