Filter
Top Products
95
Enhancements
Release K.13.16 Enhancements
For example:
ProCurve(config)# console inactivity-timer 20
■ Enhancement (PR_1000780247) — This enhancement provides hpicf Download MIB
support for transferring configuration files both to and from a TFTP server. Prior to this
enhancement, MIB support was limited to downloading and uploading software files.
■ Enhancement (PR_0000001430) — This enhancement allows the user to configure access
methods for IP Authorized Manager entries.
Management Access Security Enhancement
This feature allows the configuration of access methods for IP Authorized Manager entries. Each of
the management access methods will have its own set of authorized managers. The access methods
include:
•SSH
•Telnet
•Web
• TFTP
•SNMP
You can configure the access method via the CLI, the menu, or through the Web interface. The menu
interface only supports IPv4. The following restrictions apply to all three methods of configuration.
• When no IP authorized manager rules are configured, the access method feature is
disabled, that is, access is not denied.
• If the Management VLAN is configured, access can only be on that VLAN.
• Using the access method feature is optional. If no access method is configured, the
access method defaults to “all”.
• If access is not specified, it defaults to “manager”.
• The IP mask defaults to 255.255.255.255.
• Up to 100 IP authorized manager entries are allowed.
Syntax: console inactivity-timer <minutes>
If the console port has no activity for the number of minutes configured, the switch
terminates the session. A value of zero indicates the inactivity timer is disabled.
Default: 0 (zero)