Filter
Top Products
192 Command Line Interface
display [filter]
Displays log events on the screen according to the component or severity level filter given by
[filter]. [filter] can be one of the following:
Info
Displays all informative events
Warning
Displays all warning events
Critical
Displays all critical events
Eport
Displays all events related to E_Ports
Mgmtserver
Displays all events related to the management server
Nameserver
Displays all events related to the name server
Port [port_number]
Displays all events related to the port given by [port_number]. External ports are numbered 0
and 9; internal ports are numbered 1–8.
SNMP
Displays all events related to SNMP
Switch
Displays all events related to switch management
Zoning
Displays all events related to zoning
level
Displays the event severity level logging setting and the display level setting
options
Displays the options that are available for configuring event logging and automatic display to the
screen. Refer to the for information about how to configure event logging and display level.
port
Displays the ports being monitored for events. If an event occurs which is of the defined level and
on a defined component, but not on a defined port, no entry is made in the log.
settings
Displays the current filter settings for component, severity level, port, and display level. This
command is equivalent to executing the following commands separately: Show Log Component,
Show Log Level, and Show Log Port.
Examples The following is an example of the Show Log Component command:
McDATA4GbSAN #> show log component
Current settings for log
------------------------
FilterComponent NameServer MgmtServer Zoning Switch Blade Port Eport Snmp
The following is an example of the Show Log Level command:
McDATA4GbSAN #> show log level
Current settings for log
------------------------
FilterLevel Info
DisplayLevel Critical