Filter
Top Products
McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 211
Zoning command
Description Starts a Zoning Edit session in which to create and manage zone sets and zones. Refer to the Zone
command and the Zoneset command.
Authority Admin session except for the Active, History, Limits, and List operands. The Clear operand also
requires a zoning edit session.
Syntax
zoning
active
cancel
clear
edit
history
limits
list
restore
save
Operands
active
Displays information for the active zone set including component zones and zone members. This
operand does not require an Admin session.
cancel
Ends the current Zoning Edit session. Any unsaved changes are lost.
clear
Clears all inactive zone sets from the volatile edit copy of the zoning database. This operand
requires a zoning edit session. This operand does not affect the non-volatile zoning database.
However, if you enter the Zoning Clear command followed by the Zoning Save command, the
non-volatile zoning database will be cleared from the switch.
NOTE: The preferred method for clearing the zoning database from the switch is the Reset
Zoning command.
edit
Starts a Zoning Edit session.
history
Displays a history of zoning modifications. This operand does not require an Admin session.
History information includes the following:
• Time of the most recent zone set activation or deactivation and the user who performed it
• Time of the most recent modifications to the zoning database and the user who made them.
• Checksum for the zoning database