Filter
Top Products
McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 87
• Configured Zoning — restores all configured zone sets, zones, and aliases in the switch’s zoning
database, excluding the active zone set. Refer to ”Configuring the zoning database” on page 54
for more information.
• Configured Security — restores all security sets in the switch database. Refer to ”Securing a fabric”
on page 30 for more information.
• Radius Server — restores all RADIUS Server information defined in the switch database. Refer to
”RADIUS servers” on page 25 for more information.
7. If you select the Configured Zoning or Full Restore option and the file contains zone sets, a dialog
prompts you to activate one of those zone sets. Click Yes. Select a zone set from the drop-down list in
the Select Zone Set to be Activated dialog.
8. Click OK and view the results in the top pane of the Restore dialog.
Restoring the factory default configuration
You can restore the switch and port configuration settings to the factory default values. Select Switch >
Restore Factory Defaults to restore the factory configuration on a switch. Table 17 lists the factory default
switch configuration settings. Restoring the switch to the factory default configuration does not restore the
account name and password settings. The most current port license will remain in effect. To restore user
accounts, you must select the Reset Password File option in the maintenance menu. Refer to “Recovering a
Switch Using Maintenance Mode” in the McDATA 4Gb SAN Switch for HP p-Class BladeSystem
installation guide for your switch for information about maintenance mode and the maintenance menu.
Table 17 Factory default configuration settings
Setting Value
Symbolic Name McDATA4GbSAN
Administrative State Online
Domain ID 97
Domain ID Lock False
In-band Management True
Broadcast Support Enable
Resource Allocation Timeout (R_A_TOV) 10000 milliseconds
Interop Mode Standard
Device Scan Enabled True
Error Detect Timeout (E_D_TOV) 2000 milliseconds
SNMP Enabled True
SNMP Proxy True
IP Address 10.0.0.1
FDMI Enabled True
FDMI HBA Entry Level 1000
Subnet Mask Address 255.0.0.0
Gateway Address 10.0.0.254
Network Discovery Static
Remote Logging False
Remote Logging Host Ip Address 10.0.0.254
NTP Client Enabled False