Filter
Top Products
McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 69
Table 9 Switch data window entries
Entry Description
First Port Address Switch FC address
World Wide Name Switch World Wide Name
Serial Number Number assigned to each chassis (required for PFE keys)
Reason for Status Additional status information
User Name Account name
Login Level Authority level
Super User Super user privileges enabled/disabled
UserAuthentication Enabled Enforcement of account names and authority (always True)
Vendor Switch manufacturer
Firmware Version Active firmware version
Inactive Firmware Version Not applicable
Pending Firmware Version Firmware version that will be activated at the next reset
PROM/Boot Version PROM boot version
MAC Address Media Access Control address
IP Address Internet Protocol address
Subnet Mask Mask that determines the IP address subnet
Gateway Gateway address
SNMP Enabled SNMP enabled or disabled
Negotiated Domain ID The domain ID currently being used by the fabric
Configured Domain ID The domain ID defined by network administrator
Domain ID Lock Domain ID lock status. Prevents (True) or permits
(False—default) dynamic domain ID reassignment
Number of Ports Number of ports activated on the switch
Operational State Switch operational state: online, offline, diagnostic, down
Administrative State Current switch administrative state
Configured Admin State Switch administrative state that is stored in the switch
configuration
R_A_TOV Resource allocation timeout value
E_D_TOV Error detect timeout value
Interop Mode Interoperability mode. Use Standard to connect to FC-SW-2
compliant switches and McDATA switches in Open Fabric
Mode. Use McDATA Fabric Mode to connect to McDATA
switches in McDATA Fabric Mode. The default is Standard.
Legacy Address Format Not applicable
Interop Auto Save Zoning auto save status. Saves zoning updates in temporary
memory and the zoning database (True), or only in
temporary memory (False).