Rear top cover
Before proceeding, remove the following components:
●
Toner collection unit. See
Toner collection unit on page 79.
●
Left cover. See
Left cover on page 111.
●
Hardware integration pocket (HIP). See
Hardware integration pocket (HIP) (dn and xh models
only) on page 115.
●
Control panel assembly. See
Control panel assembly on page 116.
●
Front top cover. See
Front top cover on page 122.
●
Rear cover and rear upper cover. See
Rear cover and upper rear cover on page 124.
Remove the rear top cover
1. Remove two screws (callout 1).
Figure 2-82 Remove the rear top cover (1 of 2)
1
ENWW
Covers
127