33.XX.YY
Description
◦
33.01.01 (event code)
Recover occurred
◦
33.01.02 (event code)
Initial save occurred
◦
33.01.03 (event code)
Save/recover status OK
◦
33.02.01 (event code)
Used board/disk installed
◦
33.02.02 (event code)
Save/recover disabled (one or both disabled)
◦
33.02.03 (event code)
Save/recover disabled (product functions normally)
Recommended action
No action necessary
33.XX.YY Used board/disk
Description
An encryped board or disk with existing data previously locked to a different product has replaced the
original. If you continue, data is permanently lost.
Recommended action
To save the data on the board or disk, turn the product off. Replace the board or disk with another
board or disk.
To delete the data on the board or disk and continue, press the OK button.
41.02.00 Error
Description
A beam detected misprint error.
Recommended action
Turn the product off, and then on.
If the error persists, replace the laser/scanner assembly.
412 Chapter 3 Solve problems ENWW