Filter
Top Products
This jam occurs when the paper does not reach the registration (TOP; SR8) sensor in designated
amount of time from the start of paper pickup at printing from Tray 1 and duplex printing.
Recommended action
Clear the jam. See the clear jams section in the service manual.
13.WX.YZ Jam in Tray <X>
Description
◦
13.B2.D2 (event code)
Misfeed jam from Tray 2
This jam occurs when the paper does not reach the registration (TOP; SR8) sensor in designated
amount of time from the start of paper pick-up at printing from Tray 2 and duplex printing.
◦
13.A3.D3 (event code)
Misfeed jam from Tray 3
This jam occurs when the paper does not reach the feed sensor of each tray in designated amount
of time after the start of paper pickup.
Recommended action
Clear the jam. See the clear jams section in the service manual.
20.00.00 Insufficient memory To continue, press OK
Description
The product has experienced a memory error. You might have tried to transfer too many fonts or
macros.
Recommended action
Press the OK button to print the transferred data (some data might be lost), and then simplify the print
job or install additional memory.
21.00.00 Page too complex
Description
The page decompression process was too slow for the printer.
Recommended action
Press the OK button to continue printing (some data might be lost).
406 Chapter 3 Solve problems ENWW