Filter
Top Products
Table 3-21 General Settings menu (continued)
First level Second level Third level Fourth level Values Description
Uniformity
Control
Normal*
Alternate 1
Alternate 2
Alternate 3
Use this setting to
correct uniformity
issues in print jobs.
This may help correct
print quality issues
such as a mottled
appearance due to
poor transfer of toner
onto the page. The
default setting is
Normal. The
Alternate 1 setting
increases the T1
transfer bias and can
be used for any
media type. The
Alternate 2 setting
decreases the fuser
temperature and
reduces the
throughput. Use this
setting if you are
experiencing mottled
output due to poor
fusing on normal or
light paper types. The
Alternate 3 setting
applies the
Alternate 1 and
Alternate 2 settings
at the same time. Use
this setting if the first
two settings do not
correct the problem.
Tracking Control On*
Off
Normally, this setting
should be set to On.
Registration Normal*
Alternate
Use this setting if you
are having trouble
with color-planes
shifting or
overlapping on the
page. The default
setting is Normal.
Use the Alternate
setting if you are
seeing color mis-
registration problems.
ENWW
Tools for troubleshooting
343