Filter
Top Products
Retrieve From USB Settings menu
Table 3-22 Retrieve From USB Settings menu
First level Second level Values
Enable Retrieve from USB Enable
Disable*
General Print Settings menu
In the following table, asterisks (*) indicate the factory default setting.
Table 3-23 General Print Settings menu
First level Second level Values Description
Manual Feed Enabled
Disabled*
Use this feature to enable or
disable the manual-feed feature,
which allows the user to feed
paper into the product by hand.
When this feature is enabled, the
user can select manual feed from
the control panel as the paper
source for a job. If a tray is not
specified as part of a job,
manual feed is selected. The
factory default value for this
option is Disabled.
Courier Font Regular*
Dark
Use this feature to select which
version of the Courier font you
want to use. The factory default
setting is Regular, which uses
an average stroke width. The
Dark setting can be used if a
heavier Courier font is needed.
Wide A4 Enabled
Disabled*
Use this feature to change the
printable area of A4-size paper.
If you enable this option, eighty
10-pitch characters can be
printed on a single line of A4
paper. The factory default setting
is Disabled.
Print PS Errors Enabled
Disabled*
Use this feature to select whether
a PostScript (PS) error page is
printed when the product
encounters a PS error. The
factory default setting is
Disabled.
Print PDF Errors Enabled
Disabled*
Use this feature to select whether
a PDF error page is printed when
the product encounters a PDF
error. The factory default setting
is Disabled.
ENWW
Tools for troubleshooting
349