Filter
Top Products
Service Calibrations
5-6
HP DesignJets 500, 510 and 800 Series Printers Service Manual
2 The following message will appear asking you if you want to
perform the Standard alignment or the Special alignment. Select
the alignment you want to perform and then press Enter.
3 The Printer will start to print the alignment pattern and the
following message will be displayed on the front panel:
4 Once the Printhead Alignment is completed, the following message
will be displayed on the front panel:
5 If the calibration fails due to poor Print Quality it will try and
recover the Printheads and retry the Printhead Alignment. If the
Calibration continues to fail due to Printhead problems, the Printer
will mark the failing Printheads (but they will still be usable).
Menu
Back
Enter
Align printheads
Standard (4.5 min)
Special (11 min)
Aligning printheads.
Please wait
Printheads successfully
aligned.
Press ENTER to continue
Menu
Back
Enter