Filter
Top Products
Removal and Installation
8-57
HP DesignJets 500, 510 and 800 Series Printers Service Manual
Service Station Holder
Removal
WARNING Switch off the printer and remove the power cord.
NOTE Refer to the table on Page 8-4 for information on screw types.
1. Remove the Left Hand Cover - Refer
to Page 8-5.
2. Remove the Right Hand Cover - Refer
to Page 8-7.
3. Remove the Right Hand Trim.
4. Remove the Front Panel Assembly -
Refer to Page 8-9.
5. Remove the Interconnect PCA - Refer
to Page 8-50.
6. Remove the Service Station - Refer to
Page 8-52.
7. Remove the Fork Idler, Tensioner and
Idler Pulley - Refer to Page 8-74.
8. Remove the Encoder Strip - Refer to
Page 8-76.
9. Remove 1 T-15 screw (Type E) that
secures the Service Station Holder to
the sideplate.